How to easily disassemble aluminum alloy screen windows to improve living experience
Release time:
Jul 08,2025
After long-term use, aluminum alloy mosquito screens may affect vision and reduce ventilation effect due to the adhesion of dust and catkins. In order to solve this problem, we need to disassemble the screens regularly for cleaning. In this issue, we will introduce the disassembly methods of aluminum alloy screens, including invisible screens, sliding fixed screens, folding screens, and diamond mesh screens. For the aluminum alloy or plastic steel sliding screens that are commonly used in old communities with two sliding windows, when disassembling, just push and pull the screen fan to one side frame, then hold the frame tightly with both hands, lift it up and bend it towards the room with a little force, so that the horizontal frame of the lower pulley of the screen fan is out of the screen track, and the screen window can be easily removed for cleaning.
In high-rise and low-rise residential buildings, the proportion of casement windows is relatively high, which has also promoted the diversified development of aluminum alloy screens, especially invisible screens, which have been favored by the market since their launch. However, during use, the screen may become dirty in about two years. At this time, users often do not know how to disassemble it and find it difficult to operate, which requires professional technical support to a certain extent.
To disassemble the invisible screen, you need to prepare a flat and cross screwdriver (screwdriver). When disassembling, first use a flat-blade screwdriver to gently pry the middle of the hook pad at the bottom of the invisible screen, so that the pad falls to the left or right to the track plug lock, and then pry off the pad material. Next, use a cross screwdriver to unscrew the screws of the left and right track plugs. After that, use a flat-blade screwdriver to reach in from the bottom of the track, move up to the lock plate buckle, and pry with a little force. The disassembly steps for the left and right tracks are the same. Finally, use a cross screwdriver to loosen the screws on the inside of the left and right plugs of the screen box, and the screen window can be removed.
It should be noted that there may be differences in the disassembly of invisible screens designed by different manufacturers. In order to simplify installation, some small manufacturers may connect the screen box, left and right slides, and the pad material into a whole with screws, and the screen window frame is also fixed with screws around. When disassembling such screens, you only need to loosen the screws with a cross screwdriver (screwdriver), but be careful to avoid twisting and breaking the plug corners at the connection of the screen window.
The folding screen is precisely assembled by aluminum alloy frame, waterproof folding screen, cross threading and corner accessories, and is usually fastened on the door and window frame with about five screws. When disassembling, you need to use a cross screwdriver to gently loosen the screws on the inside of the four corners of the frame, and pay attention to using a paper cutter to cut the silicone fitting installation part.
In recent years, the application of diamond mesh screens in the field of window security has become more and more extensive. Its disassembly features mainly include split frame-frame diamond mesh screens and flat-open diamond mesh screens. When disassembling, first unlock the safety lock with a key, and then rotate the actuator 90 degrees to remove the window sash. It should be noted that the diamond screen frame and the window frame are usually fixed with about six screws, which can be easily loosened with a cross screwdriver when disassembling.
Next page
| LATEST NEWS
Contact Us
Litang Town Industrial Park, Binyang County, Nanning City, Guangxi Zhuang Autonomous Region
Power：www.300.cn